The HomeLab Shielded Display is a small OLED display with transparent acrylic shield in front to protect from dust or spills. It comes also with a short connection cable and with some screws to fix it to a front panel of a box.

Acrylic shield:

• Width: 48 mm
• Height: 33 mm
• Thickness: 2 mm
• Wholes diameter: 3 mm
• Material: clear PMMA

Display:

• Screen size: 0.96”
• Screen dimensions: 22 x 11 mm
• Dot matrix: 128 x 64 pixels
• Pixel technology: OLED
• Pixel colour: white
• Colour depth: monochrome
• Chip driver: SSD1306
• Interface: I2C
• Supply voltage: 3 - 5 V

If it is to be connected to Raspberry Pi or ESP8266 the display should be supplied by 3.3V.

The set comes inside a small plastic box. The items:

• 0.96” I2C white OLED display, 1 pc
• HomeLab Acrylic Shield, 1 pc
• Flat 4-wires cable, 15 cm, 1 pc
• M2.5 metal screw, 6 pcs
• M2.5, 5mm brass nut, 6 pcs
• Plastic washer, 6 pcs
• Plastic stand-off, 2 pcs
• Sticky rubber tape, 5x2x0.2 cm, 2 pcs
• Sticker with holes template, 2 pcs

Want to buy?

The price for a set is
$11.50.

Additionally a shipping charge is added which depends on buyer's region:
$5.50 for Europe,
$6.00 worldwide,
$3.00 for Bulgaria.

There will be no shipping charge if a pH-module is purchased at a web-shop elsewhere and this item is to be send in its pack as an accessory. Contact us early to arrange the common shipping.

The item is shipped with a tracking number.

Payment has to be made to a PayPal account. Contact us for details.